Directions for use:
Sand up to #400 grit sandpaper. Apply with a cotton cloth, brush, or short nap roller in thin and light coats. Allow to dry 6-8 hours. Sand with #400 grit sandpaper between coats and reapply if a darker color is desired. Seal with L.Co Tung Oil Finish for interior use, or L.Co Exterior Oil for exterior use.
Clean application tools immediately with mineral spirits or turpentine. Properly dispose of rags, applicators and waste.
Uniquely formulated with pure tung oil, isoparaffin, organic pigment, modified waxes, modified alkyd resin, safe drying agents, UV absorbers and light inhibitors.
Non-toxic when fully cured.