L.Co tung oil plant based wood finishing products.

Available in a natural sheen.

Product Uses

Use on interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames and various woodworking projects. L.Co Tung Oil Finish provides exceptional adhesion to oily, dense woods like teak, rosewood, and walnut.

Product Details

Description:
L.Co’s Tung Oil Finish provides a good balance of beauty, protection, and ease of application for interior decorative woodworking projects that create the look of a traditional hand rubbed polish with a natural sheen.

New wood application:
Sand up to #400 grit sandpaper. Apply with a cotton cloth, brush, or short nap roller in thin and light coats. Allow to dry 6-8 hours. Sand with #400 grit sandpaper between coats. Minimum 2 coats recommended.

Repair | Maintenance:
Clean the surface being repaired with gentle soap and water. When dry, lightly sand the surface with #400 grit sandpaper if necessary. Apply with a cotton cloth, brush, or short nap roller in thin and light coats. Allow to dry 6-8 hours. Sand with #400 grit sandpaper between coats.

Clean up:
Clean application tools immediately with mineral spirits or turpentine. Properly dispose of rags, applicators and waste.

Ingredients:
Uniquely formulated with pure tung oil, refined linseed oil, isoparaffin, modified waxes, modified alkyd resin, and safe drying agents.

Non-toxic when fully cured.

Product Support

L.Co products are safe for children's toys and furniture and safe for food contact when fully cured

At L.Co we take great care to ensure the safety of all of our products. We pledge that every product we make, and every product we will ever make, will meet the safety demands of health-conscious consumers. We guarantee that all of our products meet US Federal Drug Administration (FDA) requirements for the use of its coatings on food contact surfaces. We will never use toxic heavy metals or their compounds in any of our products. Our raw materials are sourced from internationally recognized and trusted suppliers with proper documentation and certification of their materials.

All L.Co products contain tung and linseed plant based oils

• Natural plant oils.

• Organic earth pigments.

• Lead free drying agents.

• Non-toxic.

• Safe for children’s toys and furniture.

• Safe for food contact.

All L.Co products contain tung and linseed plant based oils

3rd party testing.

L.Co products meet or exceed the standards for wood coatings specified by the US FDA, EU REACH, the migration of elements required by the European Standard “Safety of Toys” EN 71 Part 3: 2013+A1:2014, Canada’s Consumer Product Safety Directorate (CPSD), and the US Consumer Product Safety Improvement Act (CPSIA). These detailed reports are made available to all of our customers on our website: http://lco-usa.com/support/

Eco-Friendly.

L.Co uses all natural plant based oils and organic earth pigments from sustainable resources in our products. This means you can feel better about what you are putting on your projects. L.Co proudly works directly with local farmers to sustainably grow, harvest, and cold-press our raw tung oil that is used in every one of our products.